Safety information
•For use in dry, oil free indoor environments only.
•Do not use to link between buildings.
•Not suitable for use in hazardous or explosive environments or next to highly flammable materials.
•Ensure that all twisted pair interconnect cables are installed in compliance with all applicable wiring regulations.
•Do not connect the CATx link interface (RJ45 style connector) to any other equipment, particularly network or telecommunications equipment.
•Where possible, avoid laying the twisted pair link cable(s) alongside power cables.
•Do not attempt to service the module yourself.
•The modules do not provide ground isolation and should not be used for any applications that require ground isolation or galvanic isolation.
•For correct operation, the transmitter and receiver modules must have ground connections. At the computer end, this is achieved by ensuring that the computer that the module is connected to has a ground connection. At the audio/visual device end, this can be achieved by ensuring that the power supply is connected to a grounded power outlet. Alternatively, a ground connection will be made via the monitor, if the monitor is itself grounded.
Warranty
Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of two years from the date of original purchase. If the product should fail to operate correctly in normal use during the warranty period, Adder will replace or repair it free of charge. No liability can be accepted for damage due to misuse or circumstances outside Adder’s control. Also Adder will not be responsible for any loss, damage or injury arising directly or indirectly from the use of this product. Adder’s total liability under the terms of this warranty shall in all circumstances be limited to the replacement value of this product. If any difficulty is experienced in the installation or use of this product that you are unable to resolve, please contact your supplier.
CATX Dual Access Module
Quick Start (CATX-USBA-DA and CATX-USB-DA)
The two variants of the CATX Dual Access Module are highly compact devices that allow you to share a single computer between two sets of peripheral devices. The
The module connects to various ports on your computer. You then connect it via CAT 5, 5e or 6 cabling to AdderView CATx KVM switches and/or Adder extender receivers (either AdderLink X2 Silver or X200), each of which can be located up to 300 metres from the module. Your video displays, keyboard, mice and speakers are linked to the remote devices.
The CATX Dual Access Module uses a USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation.
What’s in the box |
|
* | * Not fitted on |
| |
CATX Dual | models |
| |
Access Module |
|
*
support@adder.com
www.adder.com
Adder Technology Limited, | Adder Corporation, | Adder Asia Pacific | |
Technology House, | 350R Merrimac Street, | 6 New Industrial Road, | |
Trafalgar Way, Bar Hill, | Newburyport, | Hoe Huat Industrial Building | |
Cambridge, CB23 8SQ, | MA 01950, | ||
United Kingdom | United States of America | ||
Singapore 536199 | |||
Tel: +44 (0)1954 780044 | Tel: | Tel: +65 6288 5767 | |
Fax: +44 (0)1954 780081 | Fax: | Fax: +65 6284 1150 | |
|
|
©2011 Adder Technology Ltd • Release 1.0d • June 2011 • Part No.
All trademarks are acknowledged. Documentation by Corporate Text & Design (www.ctxd.com)
What you may additionally need
| L |
|
|
|
| OC | REM |
|
|
|
| OSD |
| |
|
|
| UP | |
|
|
|
| G L |
|
|
|
| CK P |
|
|
|
| WR |
AdderView CATx |
| ww | m | |
|
|
| ||
|
|
| w.adder.co | |
KVM switch
RE
POW
L | TO | CAT 5, 5e or 6 link |
AC |
|
|
OL |
|
|
|
| cables, up to 300m |
|
| in length |
AdderLink X2 Silver or
X200 extender receiver
