Adder Technology DDC Ghost warranty Safety information, Warranty, FCC statement

Safety information

• For use in dry, oil free indoor environments.

• Not suitable for use in hazardous or

explosive environments or next to highly

flammable materials.

• Warning – the optional power adapter

contains live parts.

• No user serviceable parts are contained

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of two years from the date of original purchase. If the product should fail to operate correctly in normal use during the warranty period, Adder will replace or repair it free of charge. No liability can be accepted for damage due

DDC Ghost

User Guide

within the module or the power adapter

- do not dismantle.

• Do not use the power adapter if the

power adapter case becomes damaged,

cracked or broken or if you suspect that it

is not operating properly.

• Replace the power adapter with a

manufacturer approved type only.

• If you use a power extension cable with

the optional power adapter, make sure the

total ampere rating of the devices plugged

into the extension cable do not exceed

either the cable’s ampere rating or that of

to misuse or circumstances outside Adder’s control. Also Adder will not be responsible for any loss, damage or injury arising directly or indirectly from the use of this product. Adder’s total liability under the terms of this warranty shall in all circumstances be limited to the replacement value of this product. If any difficulty is experienced in the installation or use of this product that you are unable to resolve, please contact your supplier.

European EMC directive 89/336/EEC

The DDC Ghost module is designed to attach in-line with a VGA connection in order to present Extended Display Identification Data (EDID) to the video controller independently of the actual monitor, switch or extender unit. Video signals are passed straight through the DDC Ghost.

The Extended Display Identification Data (EDID) information stored within the DDC Ghost can either be cloned from a monitor or used with a standard set of information (see Standard EDID Information).

Optional

Blue connector

power

data

(to computer)

input

EDIDo

A

COMPUTER

t

G

V

signals

s

h

G

C

D

E

D

ideo

C

N

O

V

L

OR

U

ONIT

M

TAT

S

S

Black connector	Control button
(to monitor)	and indicator

the wall outlet.

FCC statement

This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of part 15 of FCC rules, which are designed to provide reasonable protection such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area may cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a class B computing device in accordance with the specifications in the European standard EN55022. These

limits are designed to provide reasonable protection against harmful interference. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception. However, there is no guarantee that harmful interference will not occur

in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference with one or more of the following measures: (a) Reorient or relocate the receiving antenna. (b) Increase the separation between the equipment and the receiver. (c) Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected. (d) Consult the supplier or an experienced radio/TV technician for help.

What’s in the box

						A		COMPUTER
					G
				V
				st
			o
			h
		G
	C
D											E
D
										N
									O
								L
								C
OR						TAT
	MONIT						S
						U
						S

DDC Ghost module

Adder Technology Limited,	Adder Corporation,		Adder Asia Pacific
Technology House,	29 Water Street,		6 New Industrial Road,
Trafalgar Way, Bar Hill,	Newburyport, MA 01950,		Hoe Huat Industrial Building
Cambridge, CB3 8SQ,	United States of America		#07-01, Singapore 536199
United Kingdom
Tel: +44 (0)1954 780044	Tel: +1-888-932-3337		Tel: +65 6288 5767
Fax: +44 (0)1954 780081	Fax: +1-888-275-1117		Fax: +65 6284 1150
Email: support@adder.com		Web: www.adder.com

© 2008 Adder Technology Limited • Release 1.0e • January 2008 • Part No. ADD0074

All trademarks are acknowledged. Documentation by Corporate Text & Design (www.ctxd.com)

	Video cable
	(15 pin D-type male
	to 15 pin D-type
	male)
What you may additionally need
Mains to 5VDC power adapter (if power cannot be obtained
from the controlling computer via the video cable)	Adder P/N: PSU-IEC-5VDC
Additional video cable (15 pin D-type male to 15 pin D-type male)	Adder P/N: VSC18