Replacing the mains fuse
The AC mains fuse is located on the rear of the RPS14 unit next to the AC mains connector. In the event of a mains surge or
In the unlikely event of an internal DC rail fuse failure, consult your Allen & Heath service agent or Allen & Heath technical support.
TO AVOID THE RISK OF FIRE REPLACE FUSE WITH THE CORRECT TYPE ONLY, AS INDICATED
ON THE UNIT. |
|
| |
|
|
|
|
| AC~ mains input voltage | Fuse type | A&H Part No. |
|
|
|
|
| 100V – 120V ± 10% | T 10A 250V 20mm | AL3455 |
| 220V – 240V ± 10% | T 8A 250V 20mm | AL0487 |
|
|
|
|
Technical specification
Mains Input Voltage Range: | Internally wired for region: |
|
| |
| 100V +/- 10% | 50/60Hz |
|
|
| 120V +/- 10% | 50/60Hz |
|
|
| 220V +/- 10% | 50/60Hz |
|
|
| 240V +/- 10% | 50/60Hz |
|
|
| Note: Contact Allen & Heath if your local mains voltage is not shown above. | |||
Power consumption (max.) | 650W |
|
|
|
Mains Fuse: | 100/120V | T10A 250V 20mm | A&H Part no: | AL3455 |
| 220/240V | T8A 250V 20mm | A&H Part no: | AL0487 |
Internal Fuses: |
|
|
|
|
PCB Ident | Fuse type |
|
| |
F1 (+17.5V) | T 16A 250V 20mm | A&H Part no: | AL8154 | |
F2 | T 16A 250V 20mm | A&H Part no: | AL8154 | |
F3 (+48V) | T 1.6A 250V 20mm | A&H Part no: | AL0466 | |
F4 (+12V) | T 6.3A 250V 20mm | A&H Part no: | AL0395 | |
DC Outputs: |
|
|
|
|
DC Voltage Rail | Output Current |
|
| |
+17 VOLTS |
| 8A Max. |
|
|
| 8A Max. |
|
| |
+12 VOLTS |
| 4A Max. |
|
|
+48 VOLTS |
| 500mA Max. |
|
|
Overall Dimensions: |
|
|
|
|
Front Panel: |
| 483mm x 88mm | 19 inch 2U |
|
Chassis |
| 443mm x 88mm | 17.4 inches |
|
Height including feet: |
| 92mm | 3.6 inches |
|
Depth: |
| 328mm | 12.9 inches |
|
Weight: |
| 12kg | 26.4 lbs |
|
Cable Assemblies: |
|
|
| |
| Assembly | Description | A&H Part no: | |
| DC cable | 2.9m power supply to console cable assembly |
| |
| DC LINK cable | 0.75m backup supply to main supply cable assembly |
| |
8 |
|
| RPS14 User Guide | |
