Addonics Technologies AD2U3PX1 manual Hardware Installation, Confirming USB3.0 Driver Installation

Adding the USB3.0 host controller card to an existing Windows system

Software Installation:

Note: Install NEC driver first by running the NECEL-USB3.0-Host-Driver-10170-setup from the CD that came with your package before installing the host controller.

A.From the CD start-up menu select Other Controllers. Select Model #AD2U3PX1.

B.Install the NECEL-USB3.0-Host-Driver-10170-setup

C.After driver installation, it is recommended to shutdown your system.

Hardware Installation:

1.Power off PC and remove its cover.

2.Select an empty PCI-E slot and insert the USB3.0 host controller.

3.Makes sure to secure the bracket with a screw. Close the PC cover.

4.Attach a 15-pin SATA power cable from the system’s power supply to the 15-pin SATA power connector on the host controller.

Confirming USB3.0 Driver Installation

1.Right click the My Computer icon and select Manage.

2.Click Device Manager in the Menu Tree.

3.Click the “+” sign in front of Universal Serial Bus Controllers. You should see:

NEC Electronics USB3.0 Host Controller NEC Electronics USB3.0 Root Hub.

CONTACT US

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/