Addonics Technologies ADSA3GPX8-4E manual BIOS Jumper J4, User Guide, Port eSATA RAID5/JBOD

User Guide

4 Port eSATA RAID5/JBOD

T E C H N O L O G I E S PCI-E 8x Controller (ADSA3GPX8-4E)

BIOS Jumper (J4)

Hard Drive Activity LED

Jumper Connections

Fan

eSATA Ports

BIOS Jumper (J4)

Enable BIOS (1-2) – RAID firmware is active

Disable BIOS (2-3) – Base firmware is active

By default, the BIOS jumper is set to enable BIOS (1-2) for the ADSA3GPX8-4E. This means that when you boot into a system, after POST, the RAID BIOS of the controller card with the attach devices shows up. The RAID driver needs to be installed.

If the BIOS jumper is set to disable BIOS (2-3) when you boot into a system, after POST, the RAID BIOS of the controller card does NOT show up. The BASE driver needs to be installed.

v4.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/