Software Installation for RAID:
Note: Install the SATA Utilities from the CD that came with your package first before installing the Host Controller.
A.From the CD
B.Unzip the file on your drive.
C.Click on the folder that matches your OS. Run the
Hardware Installations:
1.Power OFF PC and remove its cover.
2.Select an empty
3.Makes sure to secure the bracket with a screw.
4.Close the PC’s cover.
Windows 2000, XP, 2003 server Driver Installations:
1.Turn computer ON. When Windows boots up, “A New Hardware Found” pops on the screen and the Addonics Serial ATA PCI Host Controller is identified.
2.At the “Add New Hardware Wizard Window, click “Next”
3.Choose “Select for the best driver for your devices”, and click “Next”
4.If using a driver that has not been digitally signed by Microsoft, you will be asked if you want to continue the installation. Click Continue.
5.When the new hardware wizard has finish installing the Serial ATA card. Click “Finish” to complete the installations.
Confirming Serial ATA RAID Driver Installation:
1.Right click the My Computer icon and select Properties.
2.Click Device Manager in the Menu Tree.
3.Click the “+” sign in front of SCSI and RAID Controllers. You should see Silicon Image SiI3124 SoftRAID 5 Controller.
Note: Another option to create a RAID set is to press F4 or CTRL+S from the boot up screen. Read and follow the instruction inside the BIOS screen.
Windows Base Driver Installation:
Note: If you are only configuring independent drives using the host controller all you need to install is the driver and set the BIOS jumper to Disable BIOS.
1.Connect the SATA host controller to an available PCI
2.Turn computer ON. When Windows boots up, the “Found New Hardware Wizard” pops on the screen and the Silicon Image SiI3124 SATALink Controller is identified.
3.Place the Driver Disk on your optical drive. Select automatically look for driver on the wizard.
4.Wait while the wizard installs the software…
5.After driver installation, it is recommended to restart your system.
Confirming Serial ATA Base Driver Installation:
1.Right click the My Computer icon and select Properties.
2.Click Device Manager in the Menu Tree.
3.Click the “+” sign in front of SCSI and RAID Controllers. You should see Silicon Image SiI 3124 SATALink Controller.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |
