www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/

CONTACT US
Hardware Installation:
ADSACFAST-N
Step 1
Connect 15-pin SATA power cable to the power connector on the adapter. This will
provide power to the adapter and the CFAST card.
Step 2
Connect a SATA cable to the SATA connector on the adapter and the other end to
the SATA controller port.
Step 3
Start the Computer.
Note: If you insert the CFAST card while your system is ON and it does not get
detected, probably your SATA host controller does not support hot swap.
ADSACFASTB
Step 1
Connect 15-pin SATA power cable to the power connector on the adapter. This will
provide power to the adapter and the CFAST card.
Step 2
Connect a SATA cable to the SATA connector on the adapter and the other end to
the SATA controller port.
Step 3
Start the Computer.
Note: If you insert the CFAST card while your system is ON and it does not get
detected, probably your SATA host controller does not support hot swap.