Phone Fax, Contact Us, Hardware Installation | Addonics Technologies ADSACFB

Step 1: Connect Y-type power cable to the power connector on the adapter. This will provide power to the adapter and the CF card.

Step 2: Connect a SATA cable to the SATA connector on the adapter and the other end to the SATA controller port.

Step 3: Start the Computer.

Note: If you insert the CF card while your system is ON and it does not get detected, probably your SATA host controller does not support hot swap.

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/