ASSEMBLY
10CONTAINER INSTALLATION
1.Install containers on support frame, overlapping containers at center tube.
Note: One container should always overlap the other container at the center tube.
2.Close cover and lock latch handle over support tubes.
Latch Handle
Support Frame
11CHUTE/HOOD INSTALLATION
1.Latch upper chute to middle chute.
2.Insert upper chute into gasketed opening on the hood assembly.
WARNING!
DO NOT operate mower unless containers are properly installed. Containers are subject to wear and deterioration. Check containers frequently, replace when cracked or damaged. Use only a recommended replacement containers.
9
