CONTENTS
SAFETY RULES | 4 | OPERATION | 10 |
SERVICE | 5 | TIPS FOR IMPROVED BAGGING | 10 |
ASSEMBLY | 6 | GENERAL RECOMMENDATIONS | 10 |
|
| STORAGE | 11 |
UNPACKING INSTRUCTIONS
•Remove all parts and packing materials from carton.
TOOLS REQUIRED
•7/16" Wrench or ratchet and socket
•½" Wrench or ratchet and socket
•7/8" Socket
•Torque Wrench
• Phillips Head Screwdriver
• Hacksaw
•Pliers
CAUTION
BEFORE ASSEMBLING GRASS
CATCHER TO MOWER:
•Set parking brake.
•Place motion control levers in “NEUTRAL” position.
•Turn ignition key “OFF” and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug and place wire where it cannot come in contact with plug.
CONTAINER CONTENTS
• | Blower Assembly | • | Drive Pulley |
• | Belt Shield | • | Belt |
• | Mounting Brackets | • | Bag of Hardware |
Bag Dump Indicator
Upper Chute
Middle Chute
Belt Cover
Blower Housing
NOTE: When right hand (RH) and left hand (LH) are mentioned in this manual, it means when you are seated on the mower in the operator’s position.