Addonics Technologies ADU3ESA manual Contact Us, Type of USB Port, Drive Activity LED, Phone Fax

To any Computer/System USB3.0/2.0 Port

Drive Activity LED

Power LED

eSATAp (Hybrid eSATA) port for	(Optional) USB Extension Cable to Computer/System
connecting eSATA or eSATAp
storage device

Type of USB Port:

USB 3.0 - Green Power LED

USB 2.0 - Orange Power LED

Drive Activity LED:

Blinking red color if there is drive activity on the eSATA storage device connected to the USB3.0 to eSATAp adapter.

Note: The USB3.0 to eSATAp adapter is compatible with hardware port multipliers where the hard drives are configured as a single raid volume. The current firmware of the USB3.0 to eSATAp adapter also supports individual hard drive mode when connected to the Addonics HPM-XA. In this mode, the system sees a single USB device with multiple drive letters. Removing any of the storage units (or drive letters) associated with the single USB device forces the USB to reset with the reduced number of drives. During the reset, any ongoing drive activities for other drives connecting to the USB 3.0 adapter will be terminated. So it’s important to make sure all drives are inactive before removing any device from the port multiplier connecting to the USB 3.0 - eSATAp adapter.

CONTACT US

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/