Addonics Technologies AEIDDSAU manual Addonics Technologies, Mode Jumper JP4, Media Priority

ADDONICS TECHNOLOGIES

Model: AEIDDSAU, AEIDDSAUWP (read only mode)

The internal SATA / USB DigiDrive supports Type I, II CF Cards, CF Micro drive, SD, SDHC, miniSD (with adapter), Trans flash, SD HS (Secure Digital High Speed), MMC Cards (4-bit and 8-bit modes), RS- MMC, MMC-Micro, MMC Plus, Smart Media, xD picture card- both H and M types, Memory stick, Memory stick PRO, MS Extreme III Type media, MS PRO, HS (4-bit mode).

Close mode – force flash media to become Removable disk type

	Drive icon	Media Detection
Hot Swap	NOT RECOMMENDED
SATA port
Non hot swap	Icon always there	Flash media
SATA port	with or without flash	automatically
	media inside the	detected when
	DigiDrive	added or remove

II.Setting up the device in USB Mode

a.Connect a 4-pin floppy power cable to the internal SATA / USB DigiDrive.

b.Attach USB 5-pin header from internal SATA / USB DigiDrive to USB header on PC.

c.The drive icon appears only when flash media is inside the internal SATA / USB DigiDrive.The drive icon will disappear and reappear during media change.

Mode jumper JP4 (close or open)

USB 5-pin header

Pin 1

4-pin floppy power connector

SATA port

Mode Jumper (JP4):

Note: Only applies on SATA connection

I.Setting up the device in SATA mode

a.Connect a 4-pin floppy power cable from PC to the internal SATA / USB DigiDrive.

b.Attach SATA cable from internal SATA / USB DigiDrive to the PC SATA port.

The tables show drive icon and media detection behavior basing on the mode switch setting and the type of SATA port the internal SATA / USB DigiDrive is connected to.

Open mode – force flash media to become Fixed disk type

	Drive icon	Media Detection
Hot Swap	Icon appears only	Flash media is
SATA port	when flash media is	automatically
	inside	refresh and
		detected when
		added or removed
Non hot swap	Icon appears only	Flash media
SATA port	when flash media is	detection requires
	inside	manual refresh in
		Device Manager

Note for AEIDDSAUWP: If an unformatted flash media is use, no drive icon will show up in My Computer.

Media Priority

When more than one media is inside the internal SATA / USB DigiDrive during bootup, the media that gets detected first is according to the priority shown below

1.Compact Flash

2.Smart Media / xD Picture card

3.MMC / SD

4.Memory Stick

TECHNICAL SUPPORT

Email: http://www.addonics.com/sales/query/

Internet: http://www.addonics.com

Technical Support (8:30 am to 6:00 pm PST) Phone: 408 453-6212

Email: http://www.addonics.com/support/query/