Mini USB port | Mode switch |
(M1 or M2) |
eSATA port 5V power connector
Mode Switch:
Note: Only applies on eSATA connection
I.Setting up the device in eSATA mode
a.Connect USB power cable from PC to the eSATA / USB DigiDrive.
b.Attach eSATA cable from eSATA / USB DigiDrive to the PC eSATA port.
The tables show drive icon and media detection behavior basing on the mode switch setting and the type of eSATA port the eSATA / USB DigiDrive is connected to.
M1 mode – force flash media to become Fixed disk type
| Drive icon | Media Detection |
Hot Swap | Icon appears only | Flash media is |
eSATA port | when flash media is | automatically |
| inside | refresh and |
|
| detected when |
|
| added or removed |
Non hot swap | Icon appears only | Flash media |
eSATA port | when flash media is | detection requires |
| inside | manual refresh in |
|
| Device Manager |
M2 mode – force flash media to become Removable disk type
| Drive icon | Media Detection |
Hot Swap | NOT RECOMMENDED |
|
eSATA port |
|
|
Non hot swap | Icon always there | Flash media |
eSATA port | with or without flash | automatically |
| media inside the | detected when |
| DigiDrive | added or remove |
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |
