Addonics Technologies HD9SITDRHS manual Step

For IDE Drive

Note: Configure your IDE hard drive as Master device

Connect the 4-Pin Molex cable to the power connector on the IDE hard drive. Carefully place the IDE hard drive with the label facing up into the Diamond enclosure. Push the hard drive toward the back end to secure the drive connectors onto the Diamond enclosure’s IDE connector.

Step 4

Turn the Diamond enclosure over with the hard drive mounting holes facing up. Use the included flat head screws to secure the hard drive onto the bottom of the enclo- sure and turn in the screw to the “LOCK” position.

Step 5

Insert the enclosure into a cradle in the duplicator and secure it in place with the handle and turn the cradle's lock to the LOCK position. Note: the drive will not power up until the cradle's lock is in the LOCK posi- tion.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/