Port Multiplier
Default factory DIP Switch setting:
SW1 – RAID Setting DIP Switch
BZS – Error buzzer function
EZ – Automatic rebuilding to spare drive (one of the drives on the raid is set as a spare). If EZ is ENABLED anda drive failure occurs, the spare will automatically act as a drive replacement and rebuilding will automatically start.
M2 – RAID mode 2
M1 – RAID mode 1
M0 – RAID mode 0
OFF | OFF | OFF | OFF | OFF |
SW1
1 | 2 | 3 | 4 | 5 |
BZS EZ | M2 M1 M0 | |||
1.Error buzzer function is ENABLED (BZS) when dip switch is in OFF position
2.
3.Individual drive mode is ENABLED (M0~M2)
|
|
| Dip Switch Settings |
|
| ||
|
|
|
|
|
|
|
|
| Raid Mode | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
|
|
|
|
| Individual Drive | OFF | OFF | OFF | OFF | OFF |
|
| (Factory Default) |
| |||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
0
OFF | OFF | ON | ON | ON |
1 and 10 | OFF | OFF | ON | ON | OFF |
|
|
|
|
|
|
3
5
OFF | OFF | ON | OFF | OFF |
OFF | OFF | OFF | ON | OFF |
Clone
Large
OFF | OFF | OFF | ON | ON |
OFF | OFF | ON | OFF | ON |
Enable | Auto- | Port Multiplier Mode |
ERR Buzzer | Rebuilding |
|
Function | to Spare |
|
| Drive |
|
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |
