Front
Open
Lock
Power LED
Lever / Handle
Lock Mechanism
Drive Activity LED
To open the front panel and insert HD:
1.Using the key provided, place the lock mechanism in the Open position.
2.Pull the lever towards you. This will open the front panel.
3.Slide the 3.5” SATA drive into the tray.
4.Push the front panel to slide the SATA drive into the tray. You will hear a clicking sound indicating the front panel is closed.
5.Use the key to place the lock mechanism in the Lock position. This will secure the drive and also turn on the power.
Power LED: Once the lock mechanism is place on the Lock position, the LED will turn on. As long as it is on the Lock position, the blue LED is on.
Drive Activity LED: The blue LED will blink if there is activity on the drive.
*Serial ATA hot swap feature works only for controllers with hot swap support. You may consider adding one of the Addonics Serial ATA host controllers to your systems to ensure the hot swap capability. New controllers from Intel and other suppliers may support this feature. Please verify with your controller manufacturer if you need to have hot swap in your application.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |
