Reset switch
The RESET button enables the adding and removing of hard drives without rebooting the enclosure. Following are examples of such an applications:
a.When the cipher key is removed from the Cipher Z-Drive Cartridge System, pressing the reset switch will clear the key code and remove the drive icon. This is good for security when the Cipher Z-Drive Cartridge System is left unattended.
b.Likewise when the Cipher Z-Drive Cartridge System is connected and powered on with a cipher key, pressing the RESET button will initialize the drive. Note that if the hard drive is not encrypted or if the cipher key does not match with what is on the encrypted hard drive, it will show up as an unallocated drive under the drive management screen and no drive icon will show up on the My Computer folder. It’s very important to make sure that the correct cipher key is used on the hard drive. Proceeding to initialize the hard drive will erase all the data beyond any possibility of recovery.
Green Power LED
In order to power on the Cipher Z-Drive Cartridge System, the cipher key must be inserted prior to powering or resetting the Cipher Z-Drive Cartridge System. If the power LED does not light up, the system will not detect the hard drive connected to the Cipher Z-Drive Cartridge System.
Yellow Power LED
Lights up when there is drive activity.
CONTACT US
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
