Using the Controls

STEP 1

Select Signal

End of Cycle Signal

When the cycle is complete, a signal will sound several times. To turn the signal off, turn the End of Cycle Signal control to off.

STEP 2

Select Temperature

In order to select the correct temperature, turn the temperature control to Regular, Delicate or Air Fluff.

DRYER TEMPS

LOAD TYPE

 

 

Regular

Sturdy cottons or labels marked

Tumble Dry.

 

 

 

 

For heat sensitive items labeled

Delicate

Tumble Dry Low or Tumble Dry

 

Medium.

 

 

 

Items which need freshening.

Air Fluff

Load tumbles with room

 

temperature air.

 

 

STEP 3

Select Cycle

To select a cycle, rotate the control dial to the desired setting. When using an Auto Dry cycle, the control dial should point between More Dry and Less Dry for most loads.

Loads of larger or bulkier size may require the More Dry setting to completely dry the load. The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle.

Auto Dry Regular Fabrics

The Auto Dry Regular Fabrics cycle is designed to dry most cottons and linens. At the end of the cycle, the clothes are cooled for approximately 10 minutes to reduce wrinkling.

Auto Dry Wrinkle-Free Fabrics

The Auto Dry Wrinkle-Free Fabrics cycle is designed to dry wrinkle free cottons, synthetic fabrics and permanent press fabrics automatically.

3

Page 4
Image 4
Admiral AD-1 important safety instructions Using the Controls, Select Signal, Select Temperature, Select Cycle