CONTROLS/COMPONENT LOCATIONS

1

3

8

9

4

5

6

7

102

11

1.Main Handle. Used to pull and maneuver machine.

2.Handle Adjustment. Used to adjust height of handle.

3.Electrical Cord.

4.Solution Switch. Turns on pump. Continuous position (bottom) activates electro-valve to dispense solution to floor through jets. Intermittent position (up) requires operator to depress 1 of 3 trigger switches to dispense solution. Center position is off.

5.Brush Motor Switch. Turns on brush motor.

6.Vacuum Motor Switch. Turns on vacuum motor.

7.Trigger Switches. Activates electro-valve to dispense solution to floor through jets when solution switch is in the intermittent position.

8.Brush Motor Circuit Breaker. 6 amp. Breaker protecting brush motor.

9.Vacuum Motor Circuit Breaker. 15 amp. Breaker protecting vacuum motor.

10.Recovery Dump Hose. Facilitates draining dirty cleaning solution.

11.Solution Dump Hose. Facilitates draining excess cleaning solution from solution tank.

ADMIRAL 86038230 03/16/07

3-2