INSTANT DVD 2.0 Page 8
ENGLISH
INSTANT DVD 2.0 Page 9
ENGLISH
1. Check Instant DVD 2.0 Contents
Hardware:
(A) Instant DVD 2.0 device
(B) 5 VDC Power supply
(C) 6 ft. USB Cable
(D) 6 ft. A/V Out cable (RCA video and (L+ R) Audio to
RCA video and 3.5 mm stereo)
(E) Two (2) Installation CD's
(F) User's Manual
System Requirements
- Intel Celeron 400 MHz or AMD Athlon 600 MHZ or better
- Windows: Win98SE, WinME, Win2000 or WinXP
- 128 MB recommended
- Sound card
- 16 MB AGP video card
- CD-ROM Drive
- 150 MB hard disk space for capture/editing applications
- Disk space for video captures; Video captured at
4 Mb/sec will use approx.1.8 GB per hour
- CD Recordable Drive for making VCD and SVCD disks
- DVD Recordable Drive for making DVD disks
Getting Started
The basic steps are:
1. Check USB Instant DVD package contents
2. Wire it Up!- Audio and video connections
3. Plug it In!- Power and USB connection
4. Install Device Drivers
5. Install Application software
6. Verify Hardware Installation
7. Optimize System for Best Performance
8. Installation Summary & Diagram
9. Start Making DVD Movies!
Instant DVD 2.0 Installation Guide
• CD 1 Contains:
- Capture Wizard Capture & Export utility
- USB Instant DVD device drivers
- Ulead DVD Movie Factory 2.0 SE for Instant DVD
- Muvee autoProducer
• CD 2 Contains:
- Ulead VideoStudio 7 SE customized for Instant DVD