ADS Technologies AdvanceCAM manual Advance Cam

Advance Cam

Press “Freeze button” to freeze image. Press “Freeze button” again to copy image into memory. There is also an additional button on the wand that will allow you to change from “full” to “quad”. Press this button once and it will put you in “quad” mode. Press a second time and the camera will go back to a “full” screen mode. While in “quad” mode you must depress the capture button only four times to freeze all images if you press the button a fifth time the image will be copied into memory.

Freeze Button: Press button to freeze image on monitor.

Full / Quad Button: Choose to capture image in full

screen or capture 4 images

Transmitter:AIC900

(quad).

The transmitter has a power indicator that will

show low medium and high power. The

transmitter also has a channel selector that will select from channels 1 to 4. The power switch is located on the right side of the unit if looking from the front as shown

Power Indicator	Wireless Channel
Shows green for	display
high power and red
for low power.
	Plug this end into
	the camera.
DC Power input	Power Switch On
used to charge the	and Off.
battery	Channel Selector