6
STEP 2. (Connecting the PYRO 1394 WebCam)
Make sure the PYRO 1394 WebCam CD is in your CD ROM drive.
Connect the PYRO 1394 WebCam Device directly to your FireWire/iEEE port on the
motherboard or FireWire/iEEE add-in card.
The following windows will appear as you connect the PYRO 1394 WebCam. It may
take a minute or two to configure each component. Please follow these steps accord-
ingly:
Note: When you click “Finish”,
Audio Drivers necessary for
Video Conferencing will also
be installed.
• Click Finish.
Note: Windows 2000 prompts
will look slightly different for all
the pictures depicted here.
• Click next. Your PYRO 1394
WebCam Hardware is being
installed.