8
Installation Instructions
Mac OS
OS 9.X:
• Double Click on the ICON called PYRO WEBCAM DRIVER. This will install the
proper extensions into your EXTENSION folder. RESTART your MAC.
• Plug the PYRO Web Cam 1394 connector into an available 6 pin 1394 port on your
computer. Your computer will recognize the PYRO Web Cam
• Run any of the bundled software to begin enjoying the benefits of the
PYRO Web Cam.
OS X:
• Double Click on the ICON called OS X Driver for Webcam. This will install the
proper drivers into your EXTENSION folder. RESTART your MAC.
• Run any of the bundled software to begin enjoying the benefits of the
PYRO Web Cam.
FAQs:
• Which operating systems are supported?
Windows 98 Gold, Windows 98 Second Edition, Windows Millennium Edition(ME), Windows 2000,
*Windows XP, MAC OS 9.x, MAC OS X or later.
*Do not install drivers for the Pyro Webcam. Windows XP already have the drivers
for this device.
• I have a Firewire/iLink/IEEE 1394 port in my computer, will it work
with my computer?
The firewire card must be OHCI 1.0 compliant IEEE 1394 card in order to work with the
PYRO Web Cam. If you are not sure if your Firewire card is OHCI 1.0 compliant, please contact
the vendor of your Firewire card. In Windows 98/98SE/ME/2000, it should show up in your device
manager with the word “OHCI “.