Conserving Battery Power
If you don’t want to use the GE 99002 headphones, turn them off using the power switch.
Reconnecting to Your Phone
When you power on the GE 99002 some phones will auto connect and other phones will require you to go back to your Bluetooth® settings and manually connect. Please see the manual of your phone for how to connect.
FAQs
1.How can I tell if the headphone’s battery has insufficient power?
The battery power is almost exhausted when one or more of the following scenarios occur:
a. The headphones start to reset automatically.
b. You can constantly hear breaks on the audio link about every 30 seconds.
c. You cannot connect the headphones to any Bluetooth® enabled device.
2.Why can’t I create a connection to the headphones? a. Verify that the headphone batteries are fully charged.
b.Check to see if the headphones are powered on and the LED indicator light is on.
c.Verify that the headphones are within the specifi ed range of 30 feet (10 meters) from the audio source.
d.Check to see if any other Bluetooth® device is connected to the headphones. If other devices are connected, the receiver’s status LED indicator will fl ash slow and steady. Turn off all devices and reconnect only those you wish to use.
e.Turn both the headphones and the audio source device off. Power on the headphones and then power on the audio source and try connecting again.
9
