Jasco 99002 user manual Pairing the Headphones to a Phone, of the headphones

requires a Bluetooth® connection to the headphones be initiated and stay connected before proceeding. Other phones may initiate a Bluetooth® connection only when a call is received. Refer to your phone’s user manual for specifi c instructions. Some phones send the ring indication to the headset while others do not. If your phone supports this feature, you should hear the ring tone of your phone on the headset. Phones that do not support ring indication will automatically accept the call.

When using the GE 99002 headphones with a music source and a phone at the same time, the headphones should be paired with the phone before pairing with the audio device.

Caution: You will hear a high-pitched tone when the headphones are turned ON and the Bluetooth® pairing is initiated. You may want to wait until after the tone stops before wearing the headphones.

Pairing the Headphones to a Phone

1.Once charged, power on the GE 99002 headphones by moving the power switch to ON. The blue LED on the left ear side of the GE 99002 should start blinking, indicating it is searching for a device.

2.Make sure your Bluetooth® enabled phone is turned on and within 6 feet

of the headphones. Power ON/OFF

Use the phone’s menu system to pair it with your phone if you want to be able to interrupt the music. See the phone’s manual for directions on how to set your phone to pair with the headphones. Directions for most phones are as follows, however your phone may vary.

a.Go to the options or settings menu–select Bluetooth®

b.Enable phone for Bluetooth® operation

5