DELETE USER? | COMMAND 53 |
Description
Use this function to delete a personal passcode from your system without assistance from your security company. You need to know the user number for the passcode you want to delete..
q q
I have this feature.
I do not have this feature.
Using DEL USER ?
1.Ensure the display shows idle disarmed text.
2.Press the COMMAND bar. The display shows SYSTEM COMMAND.
3.Press 5 and 3.
NOTE: If you prefer, you may use the Function List in place of steps 2 and 3 to initiate this function. Press the MENU key to enter the Function List, then press NEXT repeatedly until you reach the DEL USER? prompt. Press ENT.
4.The display shows DEL USER #. Key in the user number and press ENT. If you do not know the user number, press the NEXT key (go to step 6).
5.USER ## (or user text, such as the name of the user, if this feature was programmed into your system by your security company) will be displayed allowing for confirmation. Press ENT. If this is not the user you wish to delete, press the NEXT or PREV key until the correct user name appears, then press the ENT key.
6.The display will now read DELETE USER ##? Press ENT if you wish to have this user deleted, and USER DELETED will be displayed. If the user number is not in the system, NOT IN USE will be displayed. If you made an error and do not wish to delete this user, press ESC.
D9412/D7412 Owner’s Manual Supplement |
|
Page 7 | 33267D 12/97 |
