Disarming and Silencing Alarms (cont'd)
- 22 -

Memory of Alarm

If an alarm occurs, the keypad displays the zone number(s) that
caused the alarm and the type of alarm. These messages remain
displayed until cleared by a user.
To clear the display:
Note the zone number displayed and enter an OFF sequence.
+ 1 *
(Security Code) OFF
Enter 4-digit security code, then press
the OFF key.*
Example: Press 7 2 9 6 then 1 *
If the READY message will not display, go to the displayed zone and
correct the fault (close windows, etc.). If the fault cannot be corrected,
notify your alarm company.
* In cases of an alarm, trouble, or CHECK message, the 4-digit secur-
ity code and OFF key must be entered into the system two times to
clear the display.