ADTRAN 1175408L1 user manual Quad FXS Voice Module Menu Options

Chapter 3. Operation

QUAD FXS VOICE MODULE MENU OPTIONS

Figure 3-1 shows the menu options available for the Quad FXS Voice Module.

The following sections describe these options.

	Figure 3-1. Quad FXS Voice Module Menu Options
PRT	Identifies the port involved.
MODE	Options are given below.
LOOP START	Sets the port to use FXS loop start signalling on the T-span and loop start
	supervision on the analog 2-wire interface.
GROUND START	Sets the port to use FXS ground start signalling on the T-span and ground
	start supervision on the analog 2-wire interface.
TR08 SINGLE	Sets the port to use Single Party Channel Unit signalling on the T-span (as
	defined by TR-TSY-000008) and loop start supervision on the analog 2-wire
	interface.
TR08 UVG	Sets the port to use UniversalVoice Grade signalling on the T-span (as
	defined by TR-TSY-000008) and either loop start or ground start supervi-
	sion on the analog 2-wire interface.
DPO	Sets the port to use Dial Pulse signalling to originate dialed numbers.
TANDEM (E&M)	Sets the port to use E&M signalling on the T-span and either loop start or
	ground start supervision on the analog 2-wire interface. See the Tandem sub-
	menus for more information.

61175408L1 Quad FXS Voice Module User Manual 3-3