Chapter 3. Operation
3-2 Dual Nx56/64 Option Module User Manual 61200142L1-1
Port
• PORT is the port ID of the V.35 interface to be config-
ured. Each slot may have up to four independent
ports.
•The
PORT ID for each port on the Dual Nx56/64 op-
tion module and the Dual Nx56/64 plug-on board is
printed next to each connector on the faceplate.
The main menu for the TSU 100 is used as an example.
Figure 3-1 shows the TSU 100 main menu with the PORT
menu items printed in bold italics. The main menu for the
other TSU/TDU/ESU units operates in a similar way.
See Appendix A in the TSU 100 User Manual for a complete
menu tree diagram.
Figure 3-1. TSU 100 Main Menu Tree
1) STATUS 1) NI PERF RPTS
2) NI ERRORS
1) NETWORK (NI 3) ACTIVE ALARMS
2) UNIT 4) VIEW HISTORY
3) MAP XCHNG
5) PORT STATUS
2) CONFIG 4) MAP IN USE A (B) 6) REMOTE PORT
5) DS0 MAP A 7) CLEAR PORT ALARM
6) DS0 MAP B 8) ENET STATUS
7) PORT CONFIG
1) TIME/DATE
TSU 100 2) FACTORY RESTORE
MAIN MENU 3) UTIL 3) SET PASSCODE
4) UNIT ID
5) SOFTWARE REV
1) NETWORK TESTS 6) PORT UTILITY
4)TEST
2) RUN SELF TEST
7) ENET ADDRESS
3) PORT TEST
8) SERIAL NUMBER
4) CANCEL TEST