Chapter 3. Operation
61200142L1-1 Dual Nx56/64 Option Module User Manual 3-11
To display the port name and the software version in-
stalled as shown in Figure 3-7, do the following:
1. Use the arrow keys to move through the available
ports, or enter the port number with the number key.
2. When the desired port name is displayed, press
Enter.
3. Press Cancel to exit or to select another port.
Figure 3-7. Port Name and Software Version Display
Run Self-Test
This menu item is used to execute both the internal test of
the TSU/TDU/ESU and of the Dual Nx56/64. This is the
same test executed during power-up. The results of the
self-test are shown on the TSU 100 display. For additional
information on Self-Test, see the Operation chapter of the
appropriate TSU/TDU/ESU user manual.
To activate a self-test, do the following:
1. Follow the standard operating procedure to access
the 4)TEST menu items.
2. With the cursor on 2)RUN SELFTEST, press Enter.
The TSU/TDU/ESU display changes and shows the
test outcome.