ADTRAN 1700601G2, 1700611G2, 1700600L2 manual NetVanta 3130 Features and Specifications

NetVanta 3100 Series Hardware Installation Guide Physical Descriptions

The default switch must be pressed WHILE the STAT light is flashing green. Do not press the default switch BEFORE the STAT light is flashing green, as this will cause boot to be missed.

If the factory default switch is pressed and held for 5 seconds after boot, the switch ports on the NetVanta 3120 will default to 10.10.10.1 and all access policies will be removed from those interfaces. If the factory default switch is pressed for 30 seconds, a default configuration will overwrite your existing configuration and reboot the unit.

4 Switch Port Interfaces

Ports 1 through 4 are RJ-45 connectors used to access the 10/100Base-T Ethernet switch.

Power Connection

The rear panel has a 12V input for the DC power supply included in the shipment. Please refer to Supplying Power to the Unit on page 24 for connection details.

NetVanta 3130

The NetVanta 3130 is a fixed-port ADSL2+ IP access router with an integral four-port Ethernet switch. It provides a single ADSL network interface and four auto-sensing 10/100Base-T Ethernet LAN interfaces. This product is ideal for carrier-bundled service offerings and enterprise-level Internet access for secure, high-speed corporate connectivity. In addition to supporting ADSL (Annex A), and ADSL2, the NetVanta 3130 supports today’s most advanced ADSL technology, ADSL2+, for greater reach and higher bandwidth, up to 25 Mbps. Some models include an integrated analog modem for dial backup and management. IPsec VPN support is included without further software upgrade. The unit is powered by a 12 VDC power supply (AC to DC power adapter included).

NetVanta 3130 Features and Specifications

The NetVanta 3130 offers the following features:

•Fixed-port ADSL router with integral 4-port Ethernet switch

•IP access router for ADSL, ADSL2, ADSL2+ networks with line rates up to 25 Mbps

•Supports ATM, PPP over ATM, and PPPoE over ATM

•Integrated analog modem for dial backup or remote management (1700610L2 only)

•ADTRAN Operating System (AOS) command line interface (CLI)

•User-friendly, web-based graphical user interface (GUI)

•Standards-based eBGP/iBGP, OSPF, RIP, static routing and bridging protocols

•Integral stateful inspection firewall protects against denial of service (DoS) attacks

•Includes ISsec VPN supporting DES/3DES/AES encryption

•Compatible with ISsec VPN-equipped devices

•Quality of service (QoS) with low latency queuing (LLQ), weighted fair queuing (WFQ), class-based weighted fair queuing (CBWFQ), and DiffServ marking

•Built-in alert and logging mechanisms

•Network address translation (NAT/NAPT), 1:1 NAT port translation, and NAT Traversal version 2

•NAT-compliant SIP ALG

•DHCP client, server, and relay

•XAUTH including RADIUS and RSA SecurID

61700600L2-34A Copyright © 2012 ADTRAN, Inc. 17