NetVanta 3200/3300/3400 Series Physical Descriptions
61200860L1-34AB Copyright © 2012 ADTRAN, Inc. 25
NetVanta 3305 Rear Panel Interfaces and LEDs
NET/DBU Option Slots
The SLOT x NET/DBU option slots support various NIM plug-in option modules. These option
modules are described in the section Option Modules on page 41.
10/100Base-T Ethernet Interface and Activity LEDs
The Ethernet ports (ETH 0/1 and ETH 0/2) are RJ-45 connectors with LEDs. The amber activity LED
flashes when data traffic is being sent or received on the Ethernet port. The green link LED is on when
the router has a good connection to the LAN. The Ethernet port provides the following:
• 10Base-T or 100Base-T with a single connector
• Auto-negotiation
•CSMA/CD
• IEEE 802.3 compatibility
CONSOLE Interface
The CONSOLE interface is an EIA-232 serial port (DCE) that provides for local management and
configuration (via a DB-9 female connector).
Power Connection
The rear panel has a power input for connection to the power supply. Power supplies are shipped with
final destinations in mind. For example, domestic routers are shipped with a wallmount supply and
international routers are shipped with a universal input lump-in-line supply with the appropriate
cables. All of the 1U-high products have universal power supplies and are shipped with the appropriate
cable. Please refer to Supplying Power to the Unit on page 69 for connection details.
NetVanta 3430
The NetVanta 3430 is a high-performance, modular IP access routers designed for cost-effective branch
office connectivity over MPLS, Frame Relay, multilink Frame Relay, PPP, MLPPP, or Ethernet networks.
For information on switch configuration for a specific application, refer to the configuration guides provided on
the ADTRAN Support Community. For details on the command line interface (CLI), refer to the AOS
Command Reference Guide. All other related documents are also available online at
http://supportforums.adtran.com.
NetVanta 3430 Features and Specifications
• Single-slot, dual-Ethernet modular IP router
• Modular Network Interface: 56K/64K DDS, T1/FT1, T1/FT1 + DSX-1, Dual T1, E1/FE1, E1/FE1 +
G.703, or ADSL (Annex A or Annex B), SHDSL (Annex A or Annex B), serial, or USB WWAN
• Modular IP access routers for MPLS, Frame Relay, multilink Frame Relay, PPP, MLPPP, PPPoE,
ATM, and HDLC networks
• High-performance processor
• Hardware encryption engine embedded
• On-board Flash memory
Connection directly to an external modem requires a cross-over cable.