®
Quick Start Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| For more detailed documentation, visit us online at www.adtran.com. | ||||||||
NetVanta 3448 Router |
|
|
|
|
|
|
|
| P/N 1200821E1 | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
45 V |
NETVANTA 3448 REAR PANEL LAYOUT
ENABLE TELNET ACCESS
The following steps create a password of adtran for Telnet access. By default, Telnet access is enabled with a password of password.
1.Verify that the prompt of your unit displays (config)#.
2.Enter line telnet 0 4 to change the configuration parameters for the Telnet sessions.
3.Enter login to initiate Telnet access.
4.Enter password adtran to change the login password for the Telnet sessions.
5.Enter exit to return to the Global Configuration mode.
6.Verify that the prompt of your unit displays (config)#.
7.Enter do write memory to save the current configuration.
CONFIGURE YOUR APPLICATION
More detailed documentation for configuring your ADTRAN unit is provided on the ADTRAN OS System Documentation CD included in your shipment. For more detail on hardware setup, refer to the appropriate NIM Quick Start Guides and the Hardware Installation Guide. For more detail on configuring your system, refer to the ADTRAN Operating System (AOS) Command Reference Guide, configuration guides, and technical support notes.
Important: For additional details on product features, specifications, installation, and safety, refer to the appropriate Hardware Installation Guide on the ADTRAN OS System Documentation CD shipped with the base unit and available online at www.adtran.com.
CONSOLE PINOUTS
Pin | Name | Description |
|
|
|
1 | DCD | Data Carrier Detect (output) |
2 | RD | Receive Data (output) |
3 | TD | Transmit Data (input) |
4 | DTR | Data Terminal Ready (input) |
5 | SG | Signal Ground |
6 | — | Tied to Pin 1 (output) |
7 | — | Unused |
8— Tied to Pin 1 (output)
9— Unused
ETHERNET PINOUTS (ETH 0/1, ETH 0/2, ETHERNET SWITCH PORTS 1 TO 8)
Pin | Name | Description | With PoE Upgrade |
|
|
| (Switch Ports 1 to 8 only) |
|
|
|
|
1 | TX1 | Transmit Positive | PoE Negative Rail |
2 | TX2 | Transmit Negative | PoE Negative Rail |
3 | RX1 | Receive Positive | PoE Positive Rail |
4, 5 | — | Unused | Unused |
6 | RX2 | Receive Negative | PoE Positive Rail |
7, 8 | — | Unused | Unused |
Quick Start Guide, | Technical Support | Copyright © 2006 ADTRAN, All Rights Reserved |
