ADTRAN quick start NetVanta E1/FE1 Network Interface Module NIM, P/N 1200868L1, Specifications

®

Quick Start Guide

For more detailed documentation, visit us online at www.adtran.com.

NetVanta E1/FE1 Network Interface Module (NIM) P/N 1200868L1

SPECIFICATIONS

Operatin Modes

E1/FE1 Interface

Clock Source

Diagnostics

Compliance

WAN-E1DBU

Frame Relay, Multilink Frame Relay, PPP, Multilink PPP, HDLC

Supported Standards: ITU-T G.703, ITU-T G.704 (CRC-4), ITU-T G.823, ITU-T G.797

Line Rate: 2.048 Mbps ±50 PPM

FE1 Line Rate: Channelized timeslot (in multiples of 56/64 kbps)

Line Code: AMI or HDB3

Framing: FAS with optional CRC-4

Receiver Sensitivity: -30 dB

Connector: RJ-48C Network, internal

Test Pattern Generation and Detection: QRSS, 511, all ones, all zeros

Network loopbacks

Alarm generation and detection

Network performance data (15 minutes and 24 hours)

FCC Part 15 Class A, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3

AS/ACIF S016, ETSI TBR 12/TBR 13

EN 60950, IEC 60950, AS/NZS 60950

INSTALLATION INSTRUCTIONS

1.Remove power from the unit.

2.Slide the option moduleinto the option slot until the module is firmly seated against the chassis.

3.Secure the pins at both edges of the module.

4.Connect the cables to the associated device(s).

5.Complete the installation of the base unit.

6.Restore power to the unit.

NetVanta modules should be installed only in

NetVanta Series products.

WAN-E1 NETWORK (RJ-48C) CONNECTION PINOUTS

Pin Name Description

1R1 Receive data from the network - Ring 1

2T1 Receive data from the network - Tip 1

3— Unused

4R Transmit data toward the network - Ring

5T Transmit data toward the network - Tip

6-8 — Unused

Physical

Dimensions: 2.75-inch W x 4.25-inch D

Operating Temperature: 0°C to 50°C

Storage Temperature: -20°C to 70°C

Relative Humidity: Up to 95 percent, noncondensing

An optional Dial Backup Interface Module (DIM) is required for dial backup applications.

For a description of the DBU pinouts, refer to the Quick Start Guide included with your DIM shipment.

Important: For additional details on product features, specifications, installation, and safety, refer to the appropriate Hardware Installation Guide on the ADTRAN OS System Documentation CD shipped with the base unit and available online at www.adtran.com.

Quick Start Guide, 61200868L1-13D, July 2005 ADTRAN Technical Support +1-256-963-8716 Copyright © 2005 ADTRAN, All Rights Reserved