Installing the NetVanta 1524 Series Switch

1GETTING STARTED — ACCESSING THE GUI

Two configuration methods are available for your NetVanta Switch:

•Web-Based GUI (discussed in this section)

•AOS CLI (discussed on page 2)

You may access the web-based GUI from any web browser on your network by following these steps:

1.Connect the switch to your PC using the ETH 0/0 port on the back of the unit.

2.Set your PC to obtain an IP address automatically (or if using a fixed IP address, set your PC to 10.10.20.2).

3.Enter the unit’s IP address in your browser address line (see example, below). The default IP address is 10.10.20.1.

4.You will then be prompted for the username and password (the default settings are admin and password).

For more detailed documentation, visit us online at www.adtran.com

P/N 1200560L1

4.The initial GUI screen appears.

Quick Start Guide, 61200560L1-13A, November 2004

Technical Support 1-888-4ADTRAN (1-888-423-8726)