ADTRAN NetVanta 1524 quick start Accessing the CLI

Installing the NetVanta 1524 Series Switch

Quick Start Guide

2ACCESSING THE CLI

The web-based GUI lets you configure the main switch settings and provides online guidance and explanations for each setting. However, using the AOS command line interface (CLI) may be necessary for more advanced configurations. Access the AOS CLI via the CONSOLE port or a Telnet session. To establish a connection to the NetVanta 1524 Switch CONSOLE port, you need the following items:

•VT100 terminal or PC (with VT100 terminal emulation software)

•Straight-through serial cable with a DB-9 (male) connector on one end and the appropriate interface for your terminal or PC communication port on the other end

1.Connect the DB-9 (male) connector of your serial cable to the CONSOLE port on the rear panel of the switch.

2.Connect the other end of the serial cable to the terminal or PC.

3.Insert the connector of the provided power cord into the power interface on the rear panel of the unit, and plug the cord into a standard electrical outlet.

4.Once the switch has powered up, open a VT100 terminal session using the following settings: 9600 baud, 8 data bits, no parity bits, and 1 stop bit. Press <Enter> to activate the ADTRAN operating system command line interface (AOS CLI).

For more detailed documentation, visit us online at www.adtran.com

P/N 1200560L1

For more details on CLI access, refer to the AOS Command Reference Guide on your ADTRAN OS System Documentation CD (included in shipment).

Quick Start Guide, 61200560L1-13A, November 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726) ♥ 2004 ADTRAN, All Rights Reserved