AM/FM RADIO OPERATION
To Listen To The Radio
1.Push the FUNCTION button to the RADIO Position. Press the ALBUM / BAND button to Select a band (AM or FM). If listening to FM, Press the MODE button to select Stereo or Mono.
2.Press and release the Skip/TUNING DN (12) or UP (13) button to tune a station. Press and hold the Skip/TUNING DN (12) or UP (13) button for rapid search tuning.
3.Adjust the VOLUME control. If FM STEREO reception is weak/noisy, press the MODE/ button (10) to Mono, in this case the reception will be monaural.
4.To turn the radio off, rotate POWER ON/OFF volume control counter clockwise.
Antennas
AM - This unit has a
FM - This unit has a
Auto Scan
Press and hold the Skip/TUNING or UP button for approximately 1 second and the unit will automatically search for the next available station.
To Set and Receive a Station into Memory
1.Tune a desired station as described in the previous
section. Press the PROG. button; the preset number | 10 12 13 |
| |
will blink. |
|
|
|
2. Within ten seconds, select the desired preset using |
|
|
|
the PRESET UP (14) or DOWN (15) button to set the |
|
|
|
memory. Press the PROG (11) button to confirm. |
|
|
|
3. To receive a preset station, simply press the PRESET |
|
|
|
UP (14) or DOWN (15) button to select the desired |
|
|
|
preset. |
|
|
|
| 11 | 14 | 15 |
9