Chapter 2 Installation
In this chapter, you will be given an overview of the
2.1 LED Indicators
There are few LEDs display the power status and network status located on the front panel of
Table 2.1: EKI-2525P LED Definition
LED | Color | Description |
| |
P1 | Green | On |
| Power input 1 is active |
|
|
| ||
Off |
| Power input 1 is inactive | ||
|
|
| ||
|
|
|
|
|
P2 | Green | On |
| Power input 2 is active |
|
|
| ||
Off |
| Power input 2 is inactive | ||
|
|
| ||
|
|
|
|
|
Red | On |
| Power input 1 or 2 is inactive | |
|
|
| ||
Off |
| Power input 1 and 2 are both active, or no power input | ||
|
|
| ||
|
|
|
|
|
|
| On |
| A device is connected utilizing Power over Ethernet on the |
FWD (1 ~ 4) | Green |
| corresponding port | |
|
| |||
|
|
| ||
|
| Off |
| No device attached or power over Ethernet function failed |
|
|
|
|
|
|
| On |
| Connected to network |
Link/Active | Green |
|
|
|
Flashing |
| Networking is active | ||
(1~5) |
| |||
|
|
|
| |
|
| Off |
| Not connected to network |
|
|
|
|
|
|
| On |
| Ethernet port full duplex |
Duplex/Collision | Yellow |
|
|
|
Flashing |
| Collision of packets occurs | ||
(1~5) |
| |||
|
|
|
| |
|
| Off |
| Ethernet port half duplex or not connect to network |
|
|
|
|
|
8 |
