Advantech MIC-3368 manual Introduction

Models: MIC-3368

1 50
Download 50 pages 41.61 Kb
Page 10
Image 10

1.1 Introduction

The MIC-3368 is a 6U-size CompactPCI™ all-in-one single board with low power Pentium® III 700MHz CPU on-board which complies with PICMG 2.0 R2.1 CompactPCI™ specifications. Targeting performance-demanding applications like computer telephony and communications. Based on Intel® ’s 440GX chipset, the MIC-3368 enhances its performance with 100 MHz front side bus.

High Performance Pentium® III Processor

The MIC-3368 integrated an Intel® low power Pentium® III 700MHz processor with the BGA2 package. The low power Pentium® III 700MHz processor has on-chip 256 KB cache providing high performance with low cost. With the support of a 100MHz CPU bus clock, the MIC-3368 can fulfill customer’s expectations of high-performance computing capability.

Compact Mechanical Design

The MIC-3368 has many functions on a single board with only one-slot width. Advantech provides a CPU heat sink specially designed for the low power Pentium®

IIIprocessor, enabling the MIC-3368 to operate without a cooling fan on the heat sink. It only needs external cooling air from the chassis fans for ventilation. This enables the MIC-3368 to use a Pentium® III CPU within a mere 1-slot wide space.

Single P2P Bridge

The MIC-3368 with single PCI-to-PCI Bridge (Intel® DEC21155) is applicable up to 8-slot enclosure (MIC-3032/MIC-3038) and drive up to seven bus master PCI slots.

PMC (PCI Mezzanine Card) IEEE1386.1 Compliant

The MIC-3368 support up to two PMC sites and compliant with PICMG 2.3 (PCI Mezzanine Card) specification. These two 32-bit PMC interface provides front access capability by PMC modules for various function demanding.

Complete I/O Functions

The MIC-3368 offers all the I/O functions of an industrial computer with the rugged Eurocard form factor. Since two PMC sites knockouts most area of front panel, only few I/O connectors are available on the front panel including one Ethernet interface, one serial port, and one PS/2 K/B and mouse. The rest of I/O have fully connected to the rear I/O module via user-define connector (J3 ~ J5) on the backplane. These I/O contain two Fast Ethernet interfaces, secondary serial port, one USB port, one VGA connector, and one PS/2 keyboard/mouse connector. The front panel also has

MIC-3368 Series User Manual -- Page 2

Page 10
Image 10
Advantech MIC-3368 manual Introduction