
Chapter 6 PCI Bus Ethernet Interface
6.1 Introduction
The board is equipped with a high performance
The Ethernet port provides a standard
6.2 Installation of Ethernet driver
Before installing the Ethernet driver, note the procedures below. You must know which operating system you are using in your board Series, and then refer to the corresponding installation flow chart. Then just fol- low the steps described in the flow chart. You will quickly and success- fully complete the installation, even if you are not familiar with instructions for
Note: | The windows illustrations in this chapter are |
| examples only. Follow the steps and pay atten- |
| tion to the instructions which appear on your |
| screen. |
6.2.1 Installation for MS-DOS and Windows 3.1
If you want to set up your Ethernet connection under the
Then choose the correct driver to install in your biscuit PC.
The installation procedures for various servers can be found on the sup- plied
D:\Biscuit\9577\LAN\82559er\wfw311
70 |