Advantech manual C-Band Hub-mount SSPA/ SSPB, Features, Overview, Application, Options

C-Band Hub-mount

SSPA/ SSPB

60W to 250W AWMA-3000C series

Features

Remote Monitor & Control

High gain and linearity

Output power up to 250W (see table A)

Gain adjustment

Output sample monitor port

Temperature gain compensation

Automatic over-temperature shutdown

Automatic high reflected power shutdown

Infinite VSWR protection

Field replaceable power supply

CE Marking

Overview
The AWMA-C series are the outdoor solid-state power amplifiers
(SSPAs), operating in C-Band frequency range. The amplifier is an			Table A
integrated unit, complete with power supply and cooling system.
Intended for outdoor operation, the AWMA-3000C is weatherproof.		RF Band		Output
Built-in microprocessor controller provides the capability for serial	Band			Power
		(GHz)
port interfaces (RS485, RS232) for remote monitoring and control.				(W)

Advantech’s SSPAs set the industry standard for linearity and operating efficiency. Built-in design features and assembly methods incorporated with efficient combining techniques result in the trouble-free operation of the amplifier.

CL	4.400 - 5.000	60 – 200
CP	6.425 - 6.725	60 – 200
CI	6.725 - 7.025	60 – 200
CR	5.725 - 6.025	60 – 250
CS	5.850 - 6.425	60 – 250

Application

The SSPAs are designed for C-Band satellite up-link applications. They are mounted outdoors, near the hub of an antenna. The AWMA-C series are available in output power from 20W to 1000W. For higher power Advantech provides phase-combined systems.

Other SSPAs are available for operation at other satellite frequency bands. With all the features of the AWMA-C, Advantech also offers a built-in converter.

CX 5.850 - 6.725 60 – 150

*Other frequency sub-bands are available. Please consult factory.

Options

Integrated Block Up Converter

Additional harmonic filter

Extreme temperature operation

Redundant system

Redundancy

With the addition of the appropriate waveguide and switch kit, the AWMA-3000C amplifiers can be easily converted for the operation in 1:1 redundant configuration with full remote Monitor and Control capability of the redundant system via serial interface. A single Monitor and Control interface is required to manage redundant system.

Accessories

Redundancy Kit

Mounting Frames

Remote M&C panel (Ethernet port optional)

www.advantechwireless.com