Advantek Networks ANS-2402G user manual Switch Operation

is ready.

2.2 Installing

The hub does not require install device driver. Users can immediately use any of the features of this product simply by attaching the cables and connecting the power, then turn on the switch.

2.2.1Desktop Installation

To locate the switching hub on the desktop and place the hub on a clean, flat desk or table close to a power outlet. Plug in all network connections and the power cable, then the system is ready

2.2.2Installing Network Cables

After placing the hub on the desktop, then we need to know how to connect the device to network.

2.2.2.1 Station Connections with Twisted-Pair Cable

Connect each station to the hub by a twisted-pair straight cable(10Base-T or 100Base-T cables). Plug one RJ-45 connector into a front-panel port of the hub, and plug the other RJ-45 connector into the station’s network adapter.

2.2.2.2 Switch to Switch Connections with Twisted-Pair Cable

In making a switch to switch connection, you can use any port to connect Another switch with any cable.

3.Switch Operation

3.1MAC Address Table and Learning

6