Advantek Networks ANS-2402G user manual Product Specifications

￿Keep Ethernet cables away from sources of electrical noise such as radios, transmitters, broadband amplifiers, power lines and fluorescent lighting fixtures.

￿Water or moisture can not enter the unit

￿Air flow around the unit and through the vents in the side of the case is not restricted

￿Never stack units more than eight high if freestanding

￿Do not place objects on top of any unit of stack

￿Do not obstruct any vents at the sides of the cases

4. Product Specifications

Standard	IEEE802.3, 10BASE-T
	IEEE802.3u, 100BASE-TX
	IEEE802.3ab, 1000BASE-T
Interface	RJ-45 x 26 Nway switching ports
	Supports Auto MDIX
Cable Connections	RJ-45 (10BASE-T) :
	UTP Category 3, 4, 5
	RJ-45 (100BASE-TX) :
	UTP Category 5
	RJ-45 (1000BASE-T)
	UTP Category 5, 6
Network	Data Rate Auto-negotiation (10Mbps, 100Mbps,
1000Mbps)
Transmission	Mode Auto-negotiation
	(Full-duplex, Half-duplex)
LED indications	Power x 1, BK x 1
	Port x 24, Link / Activity, 100M

8