14
rate and 802.11g supported rate.
The default is 2.4GHz (B+G) mode.
Mode This Wireless Access
Point can support
four modes AP, Clien t,
Bridge and
Repeater.
Network Type When in Client
mode, you can s elect
between Ad-Hoc and Infrastructure.
SSID
The SSID differentiates one WLAN
from another, therefore,
all access
points
and all devices attempting to
connect to a specific WLAN must use
the same SSID. It is case-
sensitive and
must not exceed 32 characters.
A
device will not be permitted to join the
BSS unless it can provide the unique
SSID. An SSID i
s also referred to as a
network name
because essentiall y it is
a name that identifies a wireless
network.
Channel Number Allow user to set the channel manually
or automatically.
If set channel manually,
just select the
channel you want to specify.
If “Aut
o” is selected, user can set the
channel range to have Wireless Access
Point automatically survey and choose
the channel with best situation for
communication.
The number of channe ls supported
depends on the region of this Access
Point. All stations commun
icating with
the Acces s Point must use the same
channel.
Enable Mac Clone (Single
Ethernet Client)
If your ISP restricts service to PCs only,
use the MAC Clone feature to c opy a
PC Media
Access Control (M AC) address to your
router. This procedure will ca
use the
router to appear
as a single PC, while allowing online
access to multiple computers on your
network.
Apply Changes
Press to save the new settings on the