56
3.Remove both plastic caps sideways.
3Special spanner A and sealing caps B
(2 off) and C (1 off) are supplied
with the appliance.
4.Remove screw D with its compres-
sion spring using special spanner A.
5.Turn sealing cap C upside down as
shown in the illustration.
6.Seal hole using sealing cap C.
7.Unscrew and remove two sc rews E
using special spanner A.
8.Unscrew and remove four s crews F
using special spanner A.
9.Remove transit bar G.
10.S crew in the four s crews F again.
11. Seal the two big holes using sealing
caps B.
Important! Press all sealing caps B
(2 off) and C (1 off) in firmly, so that
they snap into place. (Splash protec-
tion).