Use 19
CANCELLING THE DELAYED START:
●set the
●press the button 8 until the symbol 0’ is displayed;
●press the button 7 again to start the programme.
The button 8 cannot be selected with DRAIN programme.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before you make any change, you must pause the
7.
Changing a running programme is possible only by resetting it. Turn the programme selector dial to O and then to the new programme position. Start the new programme by pressing the button 7 again. The washing water in the tub will be not emptied out.
Interrupting a programme
Depress the button 7 to interrupt a programme which is running, the corresponding light starts blinking. Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to O to cancel a programme which is running. Now you can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the button 7.
●if the DOOR symbol disappears, the door can be opened.
●if the DOOR symbol remains lit, it means that the machine is already heating, that the water level is above the bottom edge of the door. In this case the door cannot be opened.
●If you cannot open the door but you need to open it, you have to switch the machine off by turning the selector dial to O. After a few minutes the door can be opened (pay attention to the water level and temperature!).
After closing the door, it is necessary to select the programme and options again and to press button 7.
