What to do if... 41
Problem
The door will not open:
The machine vibrates or is noisy:
Spinning starts late or the machine does not spin:
The machine does not dry or does not dry properly
Cause possible/Solution
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the DOOR symbol disappears.
There is water in the drum.
•Select drain or spin programme to empty out the water.
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after some minutes, the laundry is still not evenly distributed in the drum, the machine will not spin.
• Redistribute the laundry.
The drying time or the dryness degree has not been selected .
•Select the drying time or the dryness degree The water tap is not turned on (E10)
•Open the water tap.
The drain filter is clogged (E20)
•Clean the drain filter. The machine is overloaded.
•Introduce into the drum less laundry.
The selected drying programme, time or dryness degree was not suitable for the laundry
•Select the suitable drying programme, time or dryness degree for the laundry.
