16
Warning
●Failure to observe the instructions on cleaning the unit and
changing the filters will cause a fire hazard. You are therefore
strongly recommended to follow these instructions.
Changing the light bulb
●Disconnect the unit from the mains power supply.
●Remove the grid.
●Replace the old light bulb with a new light bulb (40 W
max.).
●If the light does not come on, make sure the bulb has
been screwed in correctly before contacting the technical
assistance service.
Cleaning●Warning: always disconnect the hood from the mains power
supply before cleaning it.
Never insert pointed objects in the motors protective grid.
●Wash the outside surfaces using a delicate detergent solution.
Never use caustic detergents or abrasive brushes or powders.
●Only ever clean the switch panel and filter grille using a damp
cloth and delicate detergents.
●It is extremely important to clean the unit and change the filters
at the recommended intervals. Failure to do so will cause grease
deposits to build up that could constitute a fire hazard.
AccessoriesThe following accessoires can be ordered through your retailers.
MKZ telescopic wall pipe outlet hose ABS120 ,120 mm Ø
Synthetic grease filter
Metal grease filter MFF2
Carbon filter KFF