AEG 2642-6 KG manual Prior to Initial StartÐUp, Electrical Connection

Models: 2642-6 KG

1 22
Download 22 pages 37.4 Kb
Page 10
Image 10
Prior to Initial StartÐUp

14.Insert the bottom hinge into the bottom of the freezer compart- ment door.

15.Fully screw down the bottom hinge.

16.Re-assemble the ventilation- grill (D)

17.Unscrew the handles. Refit them on the opposite side after having piercing the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack.

PR228

Prior to Initial StartÐUp

¥Please clean the appliance interior and all accessories prior to ini- tial start-up (see section: ÒCleaning and CareÓ).

Electrical Connection

Any electrical work required to install this appliance should be car-

ried

out by a qualified electrician or competent person.

WARNING Ð THIS APPLIANCE MUST BE EARTHED

The manufacturer declines any liability should these safety measures not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating pla- te is inside, on the left.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

Important!

The wires in the mains lead are coloured in accordance with the fol- lowing code:

Green and Yellow Earth

Blue Neutral

Brown Live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings indentifying the terminals

29

Page 10
Image 10
AEG 2642-6 KG manual Prior to Initial StartÐUp, Electrical Connection, Warning Ð This Appliance Must Be Earthed