AEG 2842-6 DT Safety, Kundendienst, Bestimmungen, Normen, Richtlinien, Intended use, Refrigerant

Models: 2842-6 DT

1 22
Download 22 pages 63.7 Kb
Page 21
Image 21
Safety

Intended useSafety

The safety aspects of our refrigerators/freezers comply with accepted technical standards and the German Appliance Safety Law. Neverthe- less, we consider it our obligation to make you aware of the following safety information:

Intended use

The refrigerator is intended for use in the home. It is suitable for the cooling, freezing and storing of frozen food, as well as for making ice. If the appliance is used for purposes other than those intended or used incorrectly, no liability can be accepted by the manufacturer for any damage that may be caused.

Alterations or changes to the freezer are not permitted for reasons of safety.

If you use the refrigerator in a commercial application or forpurposes other than the cooling, freezing or frozen storage of foods,please observe all valid legal regulations for your application.

Prior to initial start–up

Check the refrigerator for transport damage. Under no circumstance should a damaged appliance be plugged in! In the event of damage, please contact the vendor.

Refrigerant

The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environ- mental compatibility, which is nevertheless flammable.

During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become dama- ged.

If the refrigerant circuit should become damaged:

avoid open flames and sources of ignition;

thoroughly ventilate the room in which the appliance is situated.

Safety of children

Packaging (e.g. wraps, polystyrene) can be dangerous for children. There is a risk of suffocation! Keep packaging material away from children!

Please make old appliances unusable prior to disposal. Pull out the

Kundendienst

Wenn Sie bei einer Störung keine Abhilfe in dieser Gebrauchsanwei- sung finden, wenden Sie sich bitte an Ihren Fachhändler oder an unseren Kundendienst. Anschriften bzw. Telefonnummern sind im bei- liegenden Heft „Garantiebedingungen/Kundendienststellen" auf- geführt.

Gezielte Ersatzteilvorbereitung kann unnötige Wege und Kosten ersparen. Geben Sie deshalb bitte folgende Daten Ihres Gerätes an:

• Modellbezeichnung

Erzeugnis-Nummer (PNC)

Fertigungs-Nummer (S-No.)

Diese Angaben finden Sie auf dem Typschild links an der Innenseite des Gerätes. Damit Sie die Daten schnell bei der Hand haben, emp- fehlen wir, sie hier einzutragen.

Hinweis: Ungerechtfertigter Kundendienstruf ist auch während der Garantiezeit kostenpflichtig.

Bestimmungen, Normen, Richtlinien

Das Kältegerät ist für den Haushalt bestimmt und wurde unter Beach- tung der für diese Geräte geltenden Normen hergestellt.

Bei der Fertigung wurden insbesondere die nach dem Gerätesicher- heitsgesetz (GSG), der Unfallverhütungsvorschrift für Kälteanlagen (VBG 20) und den Bestimmungen des Verbandes Deutscher Elektro- techniker (VDE) notwendigen Maßnahmen getroffen. Der Kältekreis- lauf wurde auf Dichtheit geprüft.

Dieses Gerät entspricht den folgenden EG-Richtlinien:

– 73/23/EWG vom 19.2.1973 - Niederspannungsrichtlinie

– 89/336/EWG vom 3.5.1989

(einschließlich Änderungsrichtlinie 92/31/EWG) - EMV-Richtlinie

24

21

Page 21
Image 21
AEG 2842-6 DT manual Safety, Kundendienst, Bestimmungen, Normen, Richtlinien, Intended use, Prior to initial start-up